|
Warning! When using with oxygen, the relevant accident-prevention regulations must be observed. In addition, we recommend that a maximum operating pressure of 1,000 kPa (145 PSI) is not exceeded. We reserve the right to change technical specifications & prices without prior notice. |
|
Pressure Switch up to 250V change-over contacts |
|
Adjustment Ranges |
Contact |
Seal |
Part No. |
|
|
30 - 150 kPa |
4 - 21.5 PSI |
Change-over |
FKM |
405 704 003 |
|
100 - 1000 kPa |
14.5 - 145 PSI |
Change-over |
FKM |
405 804 003 |
|
1000 - 2000 kPa |
145 - 290 PSI |
Change-over |
FKM |
405 904 003 |
|
2000 - 5000 kPa |
290 - 725 PSI |
Change-over |
FKM |
406 104 003 |
|
5000 - 15000 kPa |
725 - 2175 PSI |
Change-over |
FKM |
416 004 003* |
|
OPTIONS |
|
|||
|
Switch setting to customers specification |
99 100 660 |
|||
|
Model 0140 / 0141 |
|
|
Body Material |
Zinc plated steel body |
|
Ranges |
30 to 15,000 kPa |
|
Max. Pressure Rating |
Adjustment range to 5,000 kPa = 30,000 kPa (4350 PSI) Adjustment range to 15,000 kPa = 60,000 kPa (8700 PSI) |
|
Contact |
Change-over |
|
Contact Rating |
250 VAC / 2 A |
|
Hysteresis |
10 to 20% (fixed) |
|
Protection |
IP65 (with connector in place) |
|
Max. Operation |
200 / min |
|
Mechanical Life |
106 operations @ ≤ 50 bar |
|
Temperature Range |
-5 to 120° C (dependant on seal material) |
|
Connection |
1/8” NPT male (others on request) |
|
Type 0140 |
Diaphragm type |
|
Type 0141 |
Piston type (*denotes piston type switch) |