Page Title

Warning! When using with oxygen, the relevant accident-prevention regulations must be observed. In addition, we recommend that a maximum operating pressure of 1,000 kPa (145 PSI) is not exceeded.

We reserve the right to change technical specifications & prices without prior notice.

Pressure Switch

up to 24V gold contacts for low loads

with integrated DIN Plug

Text Box: When ordering substitute the X at the end of the part number for a number in the adjacent table that corresponds to your desired diaphragm / seal material. E.g. part number 945 7## 003 would indicate switch seal material to be FKM (Viton). The ‘#’ symbol represents thread size and will be substituted for the appropriate code by our staff upon confirmation of required thread.

Adjustment Ranges		Contact	Seal	Part No.
30 - 150 kPa	4 - 21.5 PSI	Change-over	1,2,3,4 or 5	945 7## 00X
100 - 1000 kPa	14.5 - 145 PSI	Change-over	1,2,3,4 or 5	945 8## 00X
1000 - 5000 kPa	145 - 725 PSI	Change-over	1,2,3,4 or 5	945 9## 00X
1000 - 10000 kPa	145 - 1450 PSI	Change-over	1,2,3,4 or 5	946 1## 00X
5000 - 20000 kPa	725 - 2900 PSI	Change-over	1,2,3,4 or 5	956 0## 00X*

Model 0194 / 0195
Body Material	Zinc plated steel body
Ranges	30 to 20,000 kPa
Max. Pressure Rating	Adjustment range to 1,000 kPa = 10,000 kPa (1500 PSI) Adjustment range to 10,000 kPa = 30,000 kPa (4350 PSI) Adjustment range to 20,000 kPa = 60,000 kPa (8700 PSI)
Contact	Change-over
Contact Rating	24 V / 50 mA - gold contacts for low load switching