Warning! When using with oxygen, the relevant accident-prevention regulations must be observed. In addition, we recommend that a maximum operating pressure of 1,000 kPa (145 PSI) is not exceeded.

We reserve the right to change technical specifications & prices without prior notice.

Pressure Switch

up to 24V stainless steel body with gold contacts

for low loads with integrated DIN Plug
Text Box: Non-Stock Ranges (delivery time applies) Text Box: When ordering substitute the X in the part number for a number in the adjacent table that corresponds to your desired diaphragm / seal material. For example, the part number 965 703 003 would indicate that the switch seal material is FKM (Viton). Text Box: NEW!

Adjustment Ranges

Contact

Seal

Part No.

        50 - 500 kPa

     4 - 21.5 PSI

Change-over

1,2,3,4 or 5

965 703 00X

    100 - 1000 kPa

 14.5 - 145 PSI

Change-over

1,2,3,4 or 5

965 803 00X

  1000 - 5000 kPa

  145 - 725 PSI

Change-over

1,2,3,4 or 5

965 903 00X

1000 - 10000 kPa

145 - 1450 PSI

Change-over

1,2,3,4 or 5

966 103 00X

5000 - 20000 kPa

725 - 2900 PSI

Change-over

1,2,3,4 or 5

     976 003 00X*

OPTIONS

 

    Rubber cap to protect terminals

    702 100 003

    Connector for convenient installation & IP65 protection of terminals

    805 200 003

Model 0196 / 0197

Body Material

Stainless steel body (303)

Ranges

50 to 20,000 kPa

Max. Pressure Rating

Adjustment range to 10,000 kPa = 30,000 kPa (4350 PSI)

 

Adjustment range to 20,000 kPa = 60,000 kPa (8700 PSI)

Contact