Page Title

Warning! When using with oxygen, the relevant accident-prevention regulations must be observed. In addition, we recommend that a maximum operating pressure of 1,000 kPa (145 PSI) is not exceeded.

We reserve the right to change technical specifications & prices without prior notice.

IP67 Pressure Switch

up to 250V change-over contacts

Text Box: When ordering substitute the X at the end of the part number for a number in the adjacent table that corresponds to your desired diaphragm / seal material. E.g. part number 0240 457 ## 3 ### would indicate switch seal material to be FKM (Viton). The ‘#’ symbol represents thread size and will be substituted for the appropriate code by our staff upon confirmation of required thread.

Adjustment Ranges		Contact	Seal	Part No.
30 - 150 kPa	4 - 21.5 PSI	Change-over	1,2,3,4 or 5	0240 457 ## X ###
100 - 1000 kPa	14.5 - 145 PSI	Change-over	1,2,3,4 or 5	0240 458 ## X ###
1000 - 2000 kPa	145 - 290 PSI	Change-over	1,2,3,4 or 5	0240 459 ## X ###
2000 - 5000 kPa	290 - 725 PSI	Change-over	1,2,3,4 or 5	0240 461 ## X ###
5000 - 15000 kPa	725 - 2175 PSI	Change-over	1,2,3,4 or 5	0241 460 ## X ###*
OPTIONS
Switch setting to customers specification				99 100 660

Model 0240 / 0241
Material	Body: Zinc plated steel body; Cover: Anodised Aluminium
Ranges	30 to 15,000 kPa
Max. Pressure Rating	Adjustment range to 5,000 kPa = 30,000 kPa (4350 PSI) Adjustment range to 15,000 kPa = 60,000 kPa (8700 PSI)
Contact	Change-over
Contact Rating	250 VAC / 2 A
Hysteresis	10 to 20% (fixed)
Protection	IP67
Max. Operation	200 / min
Mechanical Life	10⁶operations @ ≤ 50 bar
Temperature Range	Dependant on seal material (see table below)
Connection	1/8” NPT 1/4” NPT 1/4” BSP 7/16-20 UNF 9/16-18 UNF
Cable Length	Standard delivery 2m with wire end sleeves
Type 0240	Diaphragm type
Type 0241	Piston type (*denotes piston type switch)

Seal Material		Temp. Range
1	NBR	-30°c to +100°C
2	EPDM	-30°c to +120°C
3	FKM	-5°c to +120°C
4	Silicone	-40°c to +120°C
5	HNBR	-30°c to +120°C