Text Box: Non-Stock Ranges (delivery time applies) Text Box: Special Manufacture: Manifold connection Extra ranges Text Box: 0175 switch special features: Set point change is possible during operation, large diaphragm allows accurate adjustment of set point. Adjustment screw is protected from unauthorised or accidental use. Switch has DIN plug connection (DIN 43 650). Text Box: When ordering substitute the X in the part number for a number in the adjacent table that corresponds to your desired diaphragm / seal material. For example, part number 0175 43514 3 001 would indicate that the switch seal material is FKM (Viton).

Warning! When using with oxygen, the relevant accident-prevention regulations must be observed. In addition, we recommend that a maximum operating pressure of 1,000 kPa (145 PSI) is not exceeded.

We reserve the right to change technical specifications & prices without prior notice.

Low Pressure Switch

up to 250V change-over contacts

Adjustment Ranges

Contact

Seal

Part No.

   10 - 100 kPa

     1.45 - 14.5 PSI

Change-over

1,2,3,4 or 5

0175 43514 X 001

Model 0175

Body Material

Aluminum body

Range

10 to 100 kPa

Max. Pressure Rating

2500 kPa (360 PSI)

Contact

Change-over

Contact Rating 

Resistive: 6 A @ 24 VDC & 3 A @ 220 V 

Inductive: 6 A @ 24 VDC & 500 mA @ 220 V

Hysteresis

Supplier adjustable 10 to 30%

Protection

IP65

Max. Operation

200 / min

Mechanical Life

106  operations @ ≤ 50 bar

Temperature Range

Dependant on seal material (see table below)

Connection

1/4” BSP female

Type 0175

Diaphragm type

Seal Material

Temp. Range

1

NBR

-30°c to +100°C

2

EPDM

-30°c to +120°C

3

FKM

-5°c to +120°C

4

Silicone

-40°c to +120°C

5

HNBR

-30°c to +120°C